2. Tools You Will Need
For leveling legs and Anti-Tip
Adjustable wrench or channel loci< pliers
° 5/16" Nutdriver or Flat Head Screwdriver
° Electric Drill & 1/8" Diameter
Drill Bit if
° 1/4" & 3/8" Socket driver or Nutdriver
You Will Need:
Power Supply Cord or
(for hard wiring)
To reduce the risk of tipping of the range, the range
must be secured to the floor by the properly installed
anti-tip bracket and screws packed with the range.
Failure to install the anti-tip bracket will allow the range
to tip over if excessive weight is placed on an open door
or if child climbs upon it. Serious injury might result from
spilled hot liquids or from the range itself.
If range is ever moved to a different
brackets must also be moved and installed
with the range.
* A child or adult can tip the range
and be killed.
* Verify the anti-tip
to floor or wall as
Ensure the anti-tip
device is re-engaged
or wall when the range is moved.
Do not operate
the range without
device in place and engaged.
Failure to follow
can result in
death or serious burns to children
To check if the anti-tip
use both arms and grasp the rear edge
of range back. Carefully
to tilt range
should not tilt forward.
A. Locate the Bracket Using the Template
position (right or left side) by placing
to the center of the final
range position. Mark the location
of the screw holes,
shown on template.
or cement floor. When fastening
to floor, be sure
that screws do not penetrate