Chapter 4 Technical Information
Troubleshooting
Before consulting service personnel, check the following chart for a possible
cause and solution to the trouble you are experiencing.
Monitor will not turn on
• Make sure the power cord is plugged in.
No picture
• Make sure the power cord is plugged in.
• Check the signal cable connecting the LCD monitor and the computer
(refer to page 12).
• Press the
Poor picture or abnormal picture
• Press the MENU button to adjust the Brightness Contrast option in the
OSD.
• Adjust the Color Select option in the OSD.
• Press the AUTO button on the front panel of the monitor, to
automatically adjust the display mode.
Out of range message appears
• If using Windows 9X/2000/XP, wait a few seconds; once Windows
detects the problem, a dialog will appear allowing you to manually set
up the video mode according to the preset mode timing chart
(refer to page 19).
button on the front panel of the monitor.
22
Need help?
Do you have a question about the B516 and is the answer not in the manual?
Questions and answers