NOTE:
The
button is used for switching the LCD monitor on and off, it
does not disconnect the device from the main voltage. To completely
disconnect the main voltage, please remove the power plug from the
socket.
NOTE:
The LED indicator is green when the monitor operates normally and
will turn to amber when in power saving mode. When the monitor is
off, the LED turns dark.
Installing Your LCD Monitor
Follow the instructions below to set up and install the monitor.
The package contains:
Display unit
Stand
Cover an even stable surface with a soft cloth. Place the unit face-down
on the cloth. Fit the stand onto the bottom of the display unit as shown,
then push until the two latches snap into their sockets.
DISPLAY UNIT
13
Chapter 2 Installing the Display
STAND
LATCHES
Need help?
Do you have a question about the B516 and is the answer not in the manual?
Questions and answers