Chapter 2 Installing the Display
Chapter 2
Installing the Display
Refer to the owner's manual of the computer for connections.
In the process of connecting external equipment, do not connect any AC power
cords to wall outlets until all other connections are completed.
Connecting Your LCD Monitor to a Computer
Turn off the computer and unplug the power cord.
Connect the signal cable to the VGA port on the back of the computer.
Connect the power cord to wall outlet and LCD monitor.
Press the
monitor on, then turn the computer on. If the monitor displays an image, the
monitor is successfully installed. If no image is displayed, check all
connections.
NOTE:
Unplug the monitor before installation to avoid electric shock or
damage.
button, located on the right side of the main unit to turn the
Connect to power source
3
Connect to the D-SUB port
2
12
Need help?
Do you have a question about the B516 and is the answer not in the manual?
Questions and answers