Washing Sequence - Haier HWM110-23BS User Manual

Haier twin-tub washing machine user's manual
Table of Contents

Advertisement

Washing sequence

Wash timer
Water inlet
(To set to below 2 minute,
entrance
first set to 5 minute then
turn it back. It can increase
the service life of the timer).
15
12
Wash
1.Water-filling selector
Set the water inlet selector at the "WASH" side.
(Figure 1)
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the laundries.
(Figure 4)
6.After washing, Set the "WASH SELECTOR" at
"DRAIN" in order to discharge the water. (Figure 5).
Wash selector
(standard current,
(To set to below 1 minute,
strong current)
first set to 2 minute then
turn it back. It can increase
the service life of the timer).
OFF
3
6
9
9
Water-filling selector
Spin timer
OFF
5
1
4
2
3
SPIN
WASH
OFF
15
12
6
9
Figure 1
Figure 2
Figure 3
3
Figure 4
Figure 5

Advertisement

Table of Contents
loading

Table of Contents