Haier XQG50-11 User Manual page 25

XQG50-11 Manual 10/29/02
2. Connect the hot and cold water inlet hoses to the hot and cold water faucets
respectively.
3. Connect the other end to their respective washer inlet located at the rear.
Note: Hot water needs to be at a temperature of at least 120˚F – 140˚F.
(49˚C- 60˚C) for the soap to dissolve and to avoid soap residue
remaining on clothes.
4. Install the drain hose into a drain pipe. The drain hose must be placed into a
drainpipe at least 1
neck" to hold hose in place. To avoid possible water back up, the drain hose
must reach height of at least 31
the sink is less than 37
hose through the clip on the back of the machine.
Water Inlet
1:52 PM Page 26
1 /2
inches in diameter or directly into a sink. Use the "goose
1 /2
inches minimum and 40 inches maximum. If
1 /2
inches in height, route drain
Drain Hose
Water Supply Hose
Goose Neck
SINK
Hose Bend
11
Drain Hose
English
24