Trouble Shooting Answer To Questions - Haier XQB50-10A User Manual

Trouble shooting Answer to question
(If there's breakdown, please pull off the power plug before checking) The following
phenomena are not breakdowns sometimes. Please confirm again before sending it to
repair. If there are real breakdowns, please come to the special maintenance department .
Do not repair it by yourself.
Phenomena
Buzzing upon reservation starts,
Nixie tube indicates "E0"
No or slow drain, nixie tube
indicates "E1" , buzzing.
Running pauses during spin,
nixie tube indicates "E2",
buzzing
Safety switch actuates, not
spin, (after self-correction
twice), nixie tube displays
buzzing
"E3",
No or slow water filling (not
reaching the level in 15 min),
nixie tube indicates "E4",
buzzing
Not wash
The machine does
not act
Not spin
There's abnormal sound
inside the machine.
No water filling
The machine does not act.
(the indicators are off.)
The reason
The top lid is not closed
Is the drain hose put down?
Is the drain hose blocked by
foreign material?
The top cover leaves open
Are the laundries put slantingly?
Is the machine slanting?
The water tap is not open
The water inlet valve is blocked
The water pressure is too low
and the current is too small
Is there power failure?
Is the power plug loose?
Does the water level arrive at the
set water level?
Is the power plug loose?
Is the top lid closed?
Are the laundries put orderly?
Is the machine slanting?
Is there metal material inside
the washing machine?
Are the laundries slanting in
spinning?
Is the power plug loose?
If the water faucet is turned on?
If Power On/Off and
Start/Pause are pressed?
Is there power failure?
Is the power plug loose?
How to settle
Close the top lid
Put down the drain hose. Open
and close the top lid once.
Clean the foreign material.
Open and close the top lid once.
Close the top lid
Re-order the laundries. Close
the top lid.
Level the machine in right
position. Open and close the
top lid once.
Open the water tap. Push the
"Start/Pause" button.
Clean the water inlet valve.
Push the "Start/Pause" button.
Wait for the normal water
pressure before use.
Use it when the power is on.
Insert the power plug tightly.
Affusion to the set water level.
Insert the power plug tightly.
Close the top lid
Put the laundries orderly.
Level the machine properly.
Fasten the buttons and zipper
Reorder the laundries. Close the
top lid.
Insert the plug firmly
Turn on the water faucet
Press Power On/Off and
Start/Pause
Use it when the power is on.
Insert the power plug tightly.