Washing Sequence - Haier HWM80-113S User Manual

Washing sequence

Wash timer
Wash selector
(Strong current,
(To set to below 2 minute,
first set to 5 minute then standard current)
turn it back. it can increase
the service life of the timer).
OFF
STANDARD
WASH SELECTOR
WASH TIMER
Wash
1.Water-filling selector
(1) Set the water-filling selector at the "WASH" side.
(Figure 1)
(2) Set the water level adjusting lever to needed line.
2. Fill the water and add the dissolved washing
powder to make the water level reach the preset
position. (Figure 2)
Run washing program for some time to stir and
dissolve the powder completely.
3.Put in the laundries. If the water quantity is
insufficient, please add water.
4.Select the current.
Select the strength of the current according to
the laundries. (Figure 3)
5.Select the washing time
Select the washing time according to the
laundries. (Figure 4)
6.After washing, the buzzer will ring. Set the "WASH
SELECTOR" at "DRAIN". (Figure 5).
Water-filling entrance
STRONG
DRAIN
Overfilling sign
Buzzer
(The buzzer will ring when
the washing finishes)
OFF
MAX
BUZZER
WASH SELECTOR
WASH TIMER
WASH SELECTOR
Water-filling selector handle
Spin timer
(to set to below 1 minute,
first set to 2 minute then
turn it back. it can increase
the service life of the timer).
OFF
SPIN TIMER
WASH SPIN
Figure 1
Figure 2
STRONG
STANDARD
DRAIN
Figure 3
OFF
Figure 4
STRONG
STANDARD
DRAIN
Figure 5
9