Download Print this page

Installation And Adjustment - Haier HWM70-A User Manual

Fuzzy computeried automatic washing machine
Hide thumbs


Safety precautions
Please install and adjust the machine according to the requirement of the manual, which is very
important for you to operate the machine safely and properly.
Install the bottom plate
After opening the package, please lean the
washing machine gently down on soft items
(like towel cloth, blanket, etc.). Install the
bottom plate to the bottom of the machine
with eight screws by a cross screwdriver,
then lift the machine up gently. See to the
Adjust the installation position
The largest allowable slope of the shank base
of the machine is 2 . The slanting or rough
ground will result in unstable running or
stoppage of the machine. Please adjust it with
following methods:
Confirm it's horizontal:
If the bulb of the level meter at the balance display
position is inside the standard circle, it indicates that
the machine is horizontal. Otherwise you need to
a d j u s t t h e a d j u s t a b l e l e g o f t h e m a c h i n e .
Adjust the adjustable leg:
1.To twist the adjustable leg, please first lift up the
leg side slightly, loosen the adjustable nut, and
then twist the leg.
2.After adjustment, fasten the nut.
Before using
Before using
Before using
Before using
Bottom plate
Air bubble
Not suitable
Standard circle
Adjustable nut
Adjustable leg
Soft item



  Related Manuals for Haier HWM70-A