Use The Operation Buttons - Haier HWM70-928NZP User Manual

Use the operation buttons

Description of the function of the buttons
High
3rd Rinse
Medium
2nd Rinse
Delay
Low
J
1st Rinse
Speed
Reserve
Water
Water Level
Indicator mode and meaning
Off
Flashing: indicate the running program
On: indicate the program about to run,or indicate the selected mode
Child lock function
● The function is intended for children safety and preventing the washing program from
accidental changes by children.
● Set the child lock function : Push and hold the Program button and Strong button, then
push down the Power button . After 3 beep sounds, you can continue setting desired
washing procedures. After setting ,push down the Start/Pause button. The child lock
function is activated, all of the buttons are locked and cannot make selection.
● Release the child lock function : push down Program button and Strong button at the
same time for more 3 seconds. After 3 beep sounds ,the child lock function is released.
A "Power" button
● Push the "Power" button to switch on the power.
● Under power-on mode, push it to switch off the power.
● Push the "Power" button to switch on the power.
If the "Start/Pause" button is not pushed, the
machine will switch off the power automatically
after 5 minutes.
C "Program" button
Program Application
Standard water saving washing for normal
Standard
laundries with function of stop against washing
clean by default water level will be set fuzzily
Memory
For common program, the washing machine
will memory the program selected at last time
automatically , no need to set again(water
level will be set fuzzily and automatically
and can not be memory )
For soft washing of woollen laundry
Wool
Blanket
For soft washing of blanket laundry
K
Delay
Soak Wash Rinse Spin
Time
Close Remain.
Quick Strong
Cover Time
Over
-flow
L Min Min Times Min
Soak Wash Rinse Spin
Program Application
Normal
Cotton
Child
Night
Wash
(Take example for HWM80-928NZP)
Standard
Hour
Normal
Memory
Min
Program
Cotton
Wool Child
Blanket
Night Wash
Min
Quick Strong
Air Dry
B "Start/Pause" button
● After the power is switched on,
press it to start the machine.
● During working, push it to
pause.
● During pause, push this button
to restart and go on working.
Normal washing mode(
water level will
be set fuzzily and automatically
For washing of cotton flax clothes with
function of stop against washing clean
by default
Washing the children clothes, the default
program contains soak function
For night washing or quiet washing
Power
Start/Pause
)
1 1 13