Bulbs - BMW R 1200 GS Rider's Manual

8
130
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten adjusting screws 1.
z
If the motorcycle is on the
centre stand and is raised
too far, the centre stand will lift
clear of the ground and the mo-
torcycle could topple to one side.
When raising the motorcycle,
make sure that the centre stand
remains on the ground.
Apply uniform pressure to push
the front-wheel stand down
and raise the motorcycle.

Bulbs

Replacing low-beam and
high-beam headlight bulb
The positions of the plug,
the spring wire retainer and
the bulb might not be as illus-
trated below.
Make sure the ground is level
and firm and place the motor-
cycle on its stand.
Switch off the ignition.
Remove cover 1 by turning
it counter-clockwise so as to
replace the low beam lamp.