Proper Location; Installation Instructions; Unit Dimensions - Haier HLP021-WM User Manual

Space saving 120 volt portable compact electronic top load washer
Hide thumbs Also See for HLP021-WM:
Table of Contents

Advertisement

proper location

• Select a suitable location for the washer on a hard even surface away from
direct sunlight and heat sources (e.g., radiators, baseboard heaters, cooking
appliances, etc.).
• Verify the compact washer's measurement with the location you have selected
and make sure the washer will fit.
• Make sure you hav e a grounded 120 volt outlet next to the area of
washers use.
• Any floor unevenness should be corrected with the leveling leg located on the
bottom right corner of the washer.
Cold Environments
• The washer must be placed and used at room temperatures ONLY. You must
not place the washer where the temperature is at or below freezing or outside.
• This appliance must be stored at room temperature. Do not install or operate
this appliance in an area where room temperature is below freezing.
• If you received this appliance when the outside temperature is below freezing,
do not operate until this appliance has warmed to room temperature.

Unit Dimensions

29-15/16"

installation instructions

Read carefully and understand all installation instructions before installing this
washing machine. If after completing the process you are still unsure whether
the washer has been properly installed, we recommend that you contact a
qualified installer.
17-1/4"
38-5/8"
17-5/8"
English
17-1/4"
17-5/8"
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wd-9999-14

Table of Contents