LED indicators
5
Displays the status of the HD media player.
Ensure that the IR receiver is not blocked. Otherwise, the Media Player will not
be able to receive the command from the remote control.
Rear panel
Analog audio output (red and white)
1
Insert the left and right audio cable jacks to connect to a television or other
audio equipment.
Analog video output (yellow)
2
Insert a composite cable to connect to a television or other video equipment.
Digital audio output (S/PDIF)
3
Insert an optical cable into this port to connect an external Hi-Fi audio system.
HDMI port
4
Insert an HDMI cable into this port to connect to a high-definition multimedia
interface (HDMI) device.
LAN (RJ-45) port
5
Insert an RJ-45 cable into this port to connect to a local area network (LAN).
Power (DC-In) input
6
Insert the power adapter into this port.
1-4
LED
Status
Power
OFF
Red
Blue
Storage
OFF
Blinking
ON
1
2
3
Description
The device is turned off.
The device is in sleep mode.
The device is turned on.
No storage device is found.
Receiving data from a storage device.
A storage device is found.
4
5
6
Chapter 1: Getting started