Table of Contents
Advertisement
Using Wall Mount Unit
The following procedure explains how to use the optional wall mount unit (DT-
891WH) to configure the Bridge Satellite Cradle for a wall-mounted configuration.
1. Remove the screws on the bottom of the Bridge Satellite Cradle, and remove the
desktop unit.
2. Affix the wall mount unit to the bottom of the Bridge Satellite Cradle, and secure it in
place with the wall mount unit screws.
3. Drive one of the provided screws into the wall at the location where the upper hole of
the wall mount unit to be when you mount the unit on the wall.
Do not drive the screw into the wall all the way. Keep a space of about 2mm (
between the head of the screw and the wall surface.
4. Hook the upper wall mount unit hole onto the upper screw.
E-42
2mm (
1
)
⁄
"
16
Screws
Screws
1
)
⁄
"
16
Advertisement
Table of Contents
