Rebound Damping Of Shock Absorber; Steering Lock - HUSABERG "05 Owner's Manual

REBOUND DAMPING OF SHOCK ABSORBER

By using the adjusting screw (1), the degree of damping of the rebound
can be adjusted. Turn the knob clockwise to increase damping, turn it coun-
terclockwise to reduce damping during rebounding.
STANDARD ADJUSTMENT:
– turn the adjusting screw clockwise to the stop.
– then turn the adjusting screw counterclockwise, counting the number
of clicks that corresponds to the respective type of shock absorber.
Typ White Power 12457A01 ...............22 clicks
Typ White Power 12457A02 ...............22 clicks
Typ White Power 12457A03 ...............10 clicks
WARNING: The damping unit of the shock absorber is filled
with high-compression nitrogen. Never try to take the shock
absorber apart or to do any maintenance work yourself.
Severe injuries could be the result. Never unscrew the black
screw connection (2) (15mm).

STEERING LOCK

The lock mounted on the steering head locks the steering system. To lock,
turn the handlebar all the way to the left, insert the key, turn to the left,
press in, turn to the right and pull off the key.
CAUTION: Never leave the key inserted in the steering lock.
If you turn the handlebar to the right the key could get
damaged.
OPERATION INSTRUMENTS
1
- 18 -
2