Self-Diagnosis Device; Handlebar Switches - Yamaha YZF-R6P Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Self-diagnosis device

This model is equipped with a self-di-
agnosis device for the following electri-
cal circuits:
G
throttle position sensor
G
speed sensor
If any of those circuits are defective,
3
the tachometer will repeatedly display
the following error code:
CB-11E
Circuit-specific
0 r/min for
number of r/min
3 seconds
for 2.5 seconds
(See the table
below.)
EAU03729 Use the table below to identify the
faulty electrical circuit.
CB-28E
Specific r/min
3,000 r/min
4,000 r/min
If the tachometer displays such an er-
ror code, note the circuit-specific num-
ber of r/min, and then have a Yamaha
dealer check the motorcycle.
Current
CAUTION:
engine
_
When the tachometer displays an
speed for
3 seconds
error code, the motorcycle should
be checked as soon as possible in
order to avoid engine damage.
_
Faulty electrical circuit
Throttle position sensor
Speed sensor
EC000004
3-7
1. Dimmer switch " / "
2. Turn signal switch " / "
3. Horn switch " "

Handlebar switches

Dimmer switch " /
Set this switch to " " for the high
beam and to " " for the low beam.
EAU00118
EAU03888
"