Electrolux EIMGD60LT3 Installation Instructions Manual page 22

Reversing Door
I) Reinserting Latch Indicator
1 Rotate the latch indicator and move it to the
opposite hole in the door.
insert indicator
through slot
\
\
Firmly insert the two small tabs on either
side of the latch indicator into the two slots
on either side of the hole in the door.
J) Reattaching Latch Plate
1 Rotate latch plate and move to opposite side
of door above indicator.
2 Reattach with 2 long, course-thread,
counter-sunk screws.
insert tab
Firmly press downward on the indicator until
the tab snaps in place.
and snap
K) Reinserting Hole Plug
1 Rotate the hole plug and move it to the
opposite hole in the door.
2 Firmly insert the two small tabs on either
side of the hole plug into the two slots on
either side of the hole in the door.
Firmly press downward on the hole plug until
the tab snaps in place.