Electrolux EIMGD60LT3 Installation Instructions Manual page 18

Installation Instructions
Pe orming Installation Cycle
With your dryer in final location, perform an Installation Cycle to assist in proper installation.
If your dryer has this console:
2a
2b
1 3 4
1. Empty dryer's drum and close door.
2. After you plug in the dryer the first time: wake up the
dryer by pressing any button, rotate cycle knob to
cycle one up from lower right position (1), press the
start button (3) and then the cancel button (4).
3. Wake up the dryer again by pressing any button, then
immediately and simultaneously press and hold but-
tons 2a and 2b for 5 seconds, or until the LCD display
changes.
4. The LCD window will display II'ISTRL CEICLE and show
estimated time of cycle completion. Press the start
button. The Installation Cycle will automatically per-
form various diagnostic routines. At cycle completion,
the LCD window may display II'ISTRL PR.£SI, m eaning
your new dryer is properly installed and ready for use.
If it prompts an action such as .SERVICE CORD, N O GR.S
or CRLL.SERVICE 877 figs 9287, review the installation
steps and make the necessary corrections before you
attempt to use the dryer.
5. Your dryer will exit the installation Cycle and return to
normal operation the next time you wake it up.
6. Please read the Use & Care Guide and enjoy your new
premium dryer!
If your dryer has this console:
Oo
_O
@
1. After you plug in the dryer the first time: wake up the
dryer by pressing any button and follow the prompts
on the LCD User Interface, including language selec-
tion.
2. The Installation Cycle will automatically test for correct
cord connection (on electric models), presence of
gas supply (on gas models) and free flow of exhaust
vent. At cycle completion, the LCD user interface
may display II'ISTRL PR.£St, m eaning your new dryer is
properly installed and ready for use. If it prompts an
action such as .SERVICE C ORD, N O GR.S or CRLL.SERVICE
877 figs 9287, review the installation steps and make
the necessary corrections before you attempt to use
the dryer.
3. Your dryer will exit the installation Cycle and return to
normal operation the next time you wake it up.
4. Please read the Use & Care Guide and enjoy your new
premium dryer!