Page 1
iNSTALLATiON A ND SERVICE MUSTBEPERFORMED BYA QUALiFiED iNSTALLER. iMPORTANT: SAVEFORLOCALELECTRICAL i NSPECTOR'S USE. READAND SAVETHESEiNSTRUCTiONS FORFUTUREREFERENCE. The electrical requirementsfer this even are 115-120 volts AC, 15 amps or larger. iMPORTANT-PLEASE READ ANDFOLLOW Before beginning, please read these instructions completely and carefully. Be sure to DISCONNECT THE PLUG of the microwave oven from the electrical outlet...
Page 2
NOTE: 1. Base must be capable of supporting pounds (90.7 kg). 2. Make sure base is level and front of cabinet is square. If the cabinet base is not level, the oven will tend to slide out when opening the door. 3.
Page 3
EXHAUSTDUCTASSEMBLY 1. Insert the edge of DUCT(B) into the hold lip of DUCT(C). 3. Position DUCT (A)-2 on top of the oven and insert it into Secure together by using a SCREW (A) provided in the DUCT (A)-3. Secure DUCT (A)-2 using three screws (A) kit.
Page 4
CABINET iNSTALLATiON 1. Place the oven adjacent to the wall or cabinet opening. See Illustration 7. Avoid pinching the cord between Plug the power cord into the electrical outlet. oven and the wall. Adjust the position of the oven so that the feet of the oven are fitted into the recesses of the 2.