Table of Contents
Advertisement
Special features
The following features are either unique to TOSHIBA computers or are
advanced features which make the computer more convenient to use.
Access each function using the following procedures.
*1
To access the Power Options, click Desktop -> Desktop Assist ->
Control Panel -> System and Security -> Power Options.
Display automatic
power off
HDD automatic power
*1
off
System automatic
Sleep/Hibernation
Mode
Power on password
Intelligent power
supply
Battery save mode
Panel power on/off
Low battery
automatic Hibernation
Mode
User's Manual
This feature automatically cuts off power to the
*1
computer's display panel when there is no
keyboard input for a specified time, with power
being restored the next time a key is pressed.
This can be specified in the Power Options.
This feature automatically cuts off power to the
hard disk drive when it is not accessed for a
specified time, with power being restored when
the hard disk drive is next accessed. This can be
specified in the Power Options.
This feature automatically shuts down the system
into either Sleep Mode or Hibernation Mode
when there is no input or hardware access for a
*1
specified time. This can be specified in the Power
Options.
Two levels of password security, supervisor and
user, are available to prevent unauthorized
access to your computer.
A microprocessor in the computer's intelligent
*1
power supply detects the battery's charge,
automatically calculates the remaining battery
capacity and protects electronic components
from abnormal conditions such as a voltage
overload from the AC adaptor. This can be
specified in the Power Options.
This feature lets you configure the computer in
*1
order to save battery power. This can be
specified in the Power Options.
This feature automatically turns power to the
*1
computer off when the display panel is closed,
and turns it back on when the display panel is
opened. This can be specified in the Power
Options.
When battery power is exhausted to the point
that computer operation cannot be continued, the
system automatically enters Hibernation Mode
*1
and shuts itself down. This can be specified in
the Power Options.
5-5
Advertisement
Table of Contents
