Crosley BTF2140ES0 Installation Instructions Manual

Full Size Tumble Action Washers
Before beginning installation, carefully read these instructions_ This will simplify the
installation and ensure the washer is installed correctly and safely. Leave these instructions
near the washer after installation for future references
NOTE: The electrical service to the washer must conform with local codes and ordinances
and the latest edition of the National Electrical Code, ANSI/NFPA 70_
For your safety the information in
this manual must be followed to minimize the risk
of fire or explosion or to prevent property damage,
personal injury or loss of life.
- Do not store or use gasoline or other flammable
vapors and liquid in the vicinity of this or any
other appliance.
- WHAT TO DO tF YOU SMELL GAS
. Do not try to light any appliance.
. Do not touch any electrical switch; do not
use any phone in your building.
. Clear the room, building or area of all
occupants.
. immediately call your gas supplier from a
neighbor's phone. Follow the gas suppliers
instructions.
. if you cannot reach your gas supplier, call
the fire department.
installation and service must be performed by a
qualified installer, service agency or the gas
supplier.
Printed in U.S.A.
Contents
SUBJECT PAGE
Pre-lnstallation Requirements 2
Electrical Requirements 2
Grounding Requirements 2
Water Supply Requirements 2
Drain Requirements 2
Rough-in Dimensions 3
Location Of Your Washer 4
Unpacking 4
Installation 4-6
Replacement Parts 6
P/N 134541000 (0505)