Lift the inner glass ring. Rotate it 180 degrees,
reinstall on outer door, lining up indicators - "LH"
for left-hand hinge or "RH" for right-hand hinge.
Replace indented head screws (no. 1-5) removed
earlier. Take care not to strip out the plastic holes.
Replace pan head screws (no. 6-7) removed earlier.
Take care not to strip out the plastic holes.
Rest the opening of the inner door at a 90 degree
angle on the supports for the hinge cutout cover.
Pivot the inner door down onto the outer door.
Locate new metal strike supplied with dryer
manuals. Grip new strike with pliers as shown
below. Firmly insert the strike so it is oriented