GE GTDS825GD0MC Installation Instructions Manual page 10

Installation Instructions
ADDING ELBOW AND DUCT FOR
EXHAUST TO LEFT SIDE OF CABINET
. Preossemble 4" elbow with 4" duct. Wrop duct tope
oround joint.
. Insert duct ossembly, elbow first, through the side
opening ond connect the elbow to the dryer internol duct.
CAUTION:
Be sure not to pull or damage the
electrical wires inside the dryer when inserting the duct.
EXHAUST CAN
BEADDED TO
LEFT SIDE
DUCT
TAPE
. Apply duct tope as shown on the joint between the
dryer internol duct ond the elbow.
CAUTION:
Use 4" rigid metal ducting only
inside the dryer. Internal duct
joints must be secured with
H ape, otherwise they may sepa-
rate and cause a safety hazard.
ADDING ELBOW FOR EXHAUST
THROUGH BOTTOM OF CABINET
. Insert the elbow through the rear opening ond connect
it to the dryer internal duct.
.Apply duct tope on the joint between the dryer internol
duct ond elbow, os shown on poge 6.
CAUTION:
Internal duct joints
must be secured with
tape, otherwise they
zJ
m o yseporoteon cou
a safety hazard.
ADDING COVER PLATE TO REAR OF
CABINET (SIDES AND BOTTOM EXHAUST)
J
PLATE
(KIT W E1M454)
Connect stondord metol elbows ond ducts to complete
the exhoust system. Cover back opening with o plote (Kit
WE1M454) ovoiloble from your Iocol service provider. Ploce
dryer in finol Iocotion.
w
AWA I G
NEVER LEAVE THE BACK OPENING
WITHOUT THE PLATE.
10