Configure the following parameters:
2.
In the Enable Inactivity Timeout checkbox, select or clear the checkbox.
o
In the Inactivity Timeout field, select the number of minutes of inactive time you want to pass before
o
the session closes.
In the Login Timeouts field, select the number of seconds of inactive time you want to allow before
o
failing an authentication request. For more information, see LDAP query (on page 51).
In the Enable Preemption Timeout checkbox, select or clear the checkbox.
o
In the Preemptive Timeout field, select the number of seconds you want to pass before the session
o
times out.
In the Sharing field, select each checkbox you want to enable.
o
Configuring the console switch 43