Using The User Interfaces; Local Console User Interface; Target Devices - HP Server Console Switch G2 User Manual

Using the user interfaces

After you have successfully logged into either the local console UI or the remote OBWI, the user interface
appears.
Callout Component
Heading bar
1
Side navigation
2
bar
Content area
3

Local console user interface

The local console user interface has two modes for viewing the list of target devices:
•
Target list—Full provides a full listing of the Interface adapter settings and information.
•
Target list—Basic provides a basic view and allows faster selection of the target device using up and
down arrow key navigation through the list and a search filter field to search by name.
The default view can be set in the Local Port UI settings page.

Target devices

NOTE:
using either the local console UI or the remote OBWI.
The Target Device page enables you to view the name, type, and status of every interface adapter visible to
the console switch. If you are connected to an HP IP Console Switch, you can launch a session with an
interface adapter.
Description
Displays the console switch you are logged
into
Displays system information, available
configuration and settings options, and
operations.
Displays the content for the category
selected in the side navigation bar
The Target Devices page is the default view when you launch a console switch session,
Configuring the console switch 31