Audiovox MediaBridge Installation Manual & User Manual page 23

Problem
No audio from iPod source.
Cannot select the interface.
Radio/ steering wheel controls do not
operate iPod.
USB stick is plugged into MediaBridge
but the MediaBridge audio source
cannot be entered on the radio.
TOY-USB.indd 23
Solution
First try pressing next Track, if that does not solve the issue reset the iPod.
Verify proper connection to iPod/interface. Check for compatibility. Older
iPod models don't support USB audio.
Either the iPhone/iPod or USB memory device must to be connected before
the MediaBridge can be accessed.
Reset iPod and make sure the most recent iPod firmware is installed. Check
vehicle user manual on how steering wheel controls work, long presses may
toggle alternate function.
Make sure the USB connection is not loose. On some radios, the MediaBridge
audio source isn't selectable until the entire USB drive has been scanned.
Ensure your USB stick has playable content that isn't too deep in it's file
system. The Media Bridge unit will recognize the first 8 levels of folders, with
up to 200 accessible folders within each folder. Only the first 1000 files will
be read in each folder, the rest will be ignored. USB device must also be
FAT16/32 format and contain supported MP3, WMA or AAC content.
23
5/29/2012 10:16:16 PM