Advertisement
I
22
Your HITACHI Plasma Television is equipped with an AV Network feature. This feature helps to control your
external Audio/Video
equipment (VCR, Set Top Box, DVD, etc.). Once this is setup, it allows your IR Mouse
connector to control your equipment
using your HITACHI Plasma TV Remote Control.
You can use your
HITACHI remote control to control the Audio/Video
equipment
command without the equipment's
remote
control.
The Plasma Television Rear Panel has 2 IR BLASTER jacks.
Each IR Mouse cable can connect up to 2
external Audio/video
components.
Therefore, you can connect the Plasma Television with up to four
components.
Please see the following example of an AV Network setup between your Hitachi Plasma
Television and external Audio/Video
equipment
(VCR and DVD Player).
CONNECTING
EXTERNAL
AUDIO/VIDEO
COMPONENTS
TO IR BLASTER
FOR AV NETWORK
1.
Connect your external Audio/Video
components
to the Rear Panel shown below.
2.
Connect the IR Mouse cable to the IR BLASTER output of the Rear Panel.
3.
Place the IR Mouse in front of the infrared sensor of the external components
you wish to control.
AIR
O
CABLE
®8@
@8@
OUT
......
Audio
RS232C
--
PUT
i
1
4,
8,
ACCESS THE AV NET SETUP WIZARD
Press the MENU button.
Use the CURSOR PAD • or channel scroll down
to highlight SETUR
Press the SELECT
or CURSOR
PAD 1_ button
to
select.
Use the CURSOR
PAD •
or channel
scroll to
highlight
the SET AV NET features
then press the
SELECT
button.
8.
Follow the Setup procedure
on pages 82-89.
Advertisement
