Step 7
Assemble Front Base Cover; Console Bracket to the Upright
Parts: Hardware Bag #5
(2, M10 X 15mm Silver Hex Head Bolts)
Tools: Phillips Screwdriver, 17mm Socket Wrench
U
Position the front base cover (U) over the main bracket (V). Align the
four tabs on the front base cover with the four hole on the main brack-
et. Snap into place.
V
Slide the console bracket (W) into the upright. Use
two M10 X 15mm Silver Hex Head Bolts (X) to
attach the console bracket to the upright (Y).
Note: Avoid pinching the console wires.
W
Y
X
15