This TV set has two methods to set channels, which are respectively Auto Scan, Add Channel Scan.
In this section, how to use the remote control to set channel is explained. You can also use buttons on the TV
set to set channel.
Automatically finds all channels available through antenna or cable inputs, and
stores them in memory on the All Channel List.
The Channel menu will be only operated in normal TV mode.
1 Press the MENU button and then select the Channel menu.
2 Press the
or OK button and then use
3 Press the
or OK button Select Cable or Antenna mode.
4 Press the
button to select Auto Scan.
5 Press the
or OK button to start searching.
6 To cancel searching, press the EXIT /MENU button.
When Antenna is selected, the TV will detect antenna signals
and will search for antenna TV (NTSC and ATSC) channels
available in your local area.
When Cable is selected, the TV will detect cable company
supplied signals and will search for cable TV (NTSC, QAM
modulated) channels available in your area.
The Auto Scan function search for NTSC program first and then
search for ATSC or QAM program.
button to select
Add Channel Scan
NTSC Channel 55
Owner s Manual 19
/EXIT/ MENU: Exit