Connection Options; Remote Control - Haier HL19SL2 Owner's Manual

Introduction

Connection Options

Back panel connections
1
DC IN Direct current input.
Headphone
2
Headphone audio output terminal.
jack
Connect a USB flash drive to view MPEG2 videos,
3
USB input
JPEG images or listen to MP3 songs.
Connect various types of digital audio
4
Digital Out
equipment.
Connect a HDMI device to receive digital audio
5
HDMI In
and uncompressed digital video.
Connect the video signal from a video device to
6
VIDEO In
this jack.

Remote Control

Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two (AAA) alkaline batteries in the compartment,
(plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
EN-5 Haier LED HDTV
DC IN USB
Y Pb Pr L -AUDIO- R
VIDEO L -AUDIO- R
DIGITAL OUT
HDMI IN
(COAXIAL)
PC IN
PC/DVI AUDIO IN
L R
Component
7
Connect a component video device to these jacks.
Input
Connect the audio L/R cables from the video signal
8 AUDIO In
source to these jacks.
Connect the audio L/R cables from the video signal
9 AUDIO In
source to these jacks.
Connect the audio L/R cables from a computer to
0 PC Audio In
this jack.
Connect the audio L/R cables to your audio
A AUDIO OUT
equipment.
Connect a video cable from a computer to this
B PC Video In
jack.
Antenna Connect cable or antenna signals to the TV, either
C
Input directly or through your cable box.
ANT IN