Basic Operating Instructions
- button
Press to select additional channels (digital and analog) being broadcast by the
same station. For example, to select digital channel "11.1", press "11", then
press "-" and "1"; to select analog channel 13.0, press 13 first, then press -
and 0.(You must press - and 0 when you select analog channel. If you just press
the number(eg.13), you will get digital channel)
CH.LIST button
Press to display the digital program list. Press CH+/CH- to select the item and
OK button to select the channel you desired.
FAV.LIST button
Press to display favorite list. Press CH+/CH- to select the item and VOL+ to
select the channels and VOL- to select NONE.
ARC button
ARC Button: Press to select between NORMAL, WIDE and ZOOM mode while
in Digital TV Mode, and NORMAL, ZOOM, 16:9 and 4:3 in Analog TV mode.
NOTE: WIDE, 16:9 and 4:3 are only available in some models.
The aspect ratio can only be adjusted when 16:9 signal input in Digital TV mode.
(only available in digital signal)
(only available in digital signal)