Function Menu Options - Haier Designer HL22F1 User Manual

Menu Operations

Function Menu Options

1. Press MENU button and
screen.
2. Press / ENTER
down to select the desired option .
3.Press / ENTER
the level to adjust the selected option to your preference .
4. Repeat step 2 and step 3 until desired quality has been achieved .
Function:
Language: Press
OSD Timeout: Press
time of the OSD display.
OSD Transparency: Press
to change the transparency of the OSD. To select Low, the OSD is opacity.
Screen Mode: Press
Zoom and Cinema to change the display mode. ( display mode may differ from
different inputs)
Blue Screen: Press
3 seconds if there is no signal.
DPMS: PC Power Management. To set On, the set will be in standby mode
automatically if no signal in 2 minutes; if signal input , the set will be on again
automatically.
Time Setup: Press /
Time Zone: Press
/ until the following menu appears on the
Language
Video
OSD Timeout
OSD Transparency
Audio
Screen Mode
Channel
Blue Screen
DPMS
Function
Time Setup
Lock Closed Caption
Default
Function
button to enter the Function menu and
button to confirm and
/ button to select language of the OSD.
/ to select Middle, Short and Long to change the
/ to select among Low, High and Middle
/ to select among Full Screen, Normal, Wide,
/ to select On , the screen will be in blue after
ENTER to enter the submenu.
/ to select the appropriate time zone.
English
Short
Middle
Full screen
On
On
CH+/-
Select EXIT Back
VOL+/-
/ increase and decrease
/ to go up and