Advertisement
Quick Links
ACCLIVITY™ COUNTERTOP SINK
Americast
Brand Engineered Material
®
• Acid-resistant porcelain finish
• Large bowl area
• Self-rimming with cutout template supplied
• Chrome overflow trim ring
• Shown with lavatory faucet (not included)
❏
3409.001 Center hole only
❏
3409.403 Faucet holes on 4" (102mm) centers
(illustrated)
❏
3409.803 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
483mm dia. (19") Round
Bowl sizes:
368mm (14-1/2") wide
302mm (11-7/8") front to back
178mm (7") deep
Americast
Brand engineered material is a
®
composition of porcelain bonded to enameling grade
metal, bonded to a patented structural composite.
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.4M for Americast Plumbing Fixtures
• ASTM E162 for Flammability
• NFPA 258 for Smoke Density
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen
❏ Silver ❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Optional Trim Ring for Overflow:
790730-101 Polished Brass
❏ Supplies:
❏ Trap:
* See faucet section for additional models available
© 2008 AS America Inc.
AMERICAST
FINISHED WALL
OR SPLASHBACK
SEALING
COMPOUND
*
*
260mm
356mm
(10-1/4)
(14)
203mm
(8)
SUPPLIES
AS REQ'D
1-1/4 O.D.
WASTE
NOTES:
*
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND "P" TRAP ARE
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
SEALING COMPOUND SUPPLIED BY OTHERS.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.4.
These measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided leaflet.
J57
ACCLIVITY™
COUNTERTOP SINK
BRAND ENGINEERED MATERIAL
®
102mm
(4)
79mm
(3-1/8)
C/L
483mm
(19)
10mm
COUNTERTOP
(3/8)
(BY OTHERS)
210mm
(8-1/4)
178mm
(7)
787mm
(31)
SUGGESTED
1-1/4 O.D.
TAILPIECE
OPTIONAL
241mm
(9-1/2)
FINISHED
FLOOR
Revised 2/08
Advertisement
