Table of Contents
Advertisement
UNPACKING AND HANDLING
MOVING
AND PLACING THE RANGE
The ranges have shipping weights varying from 420
Ibs. to 630 Ibs. less approx. SO Ibs. after removal of
packing
material.
It is recommended
that the door,
grates, and front kick panel be removed to facilitate
handling.
This will reduce the weight
for ease of
handling.
1
Fig. 2
CAUTION:
Proper equipment
and adequate
manpower
must be used in moving the range
to avoid damage
to the unit or the floor.
The unit is heavy and rests on
adjustable
steel legs.
Z_
WARNING:
DO NOT lift range by the oven door handles!!
It may be necessary to remove the oven doors and knobs to pass through
some doorways.
With the
doors and knobs removed, a 29-1/16"(PRD3630)/28-1/2"
(PRD3030) wide opening
is required.
Without
removing
the door, a 31-1/2" (PRD3630) /30" (PRD3030) wide opening
is required.
Remove the outer
carton and packing
material from the shipping
base.
Left Rear
Shipping
Screws
i
Fig. 3
Advertisement
Table of Contents
