Troubleshooting - Haier HTF20R21 User Manual

Haier flat panel television user manual
Hide thumbs Also See for HTF20R21:
Table of Contents

Advertisement

English

Troubleshooting

Before you call for service, your television problems can be fixed with a few minor
adjustments. Identify the type of problem you are having and then try some
suggestions below to get your television going on again.
Power
TV is not turning on:
• Check the plug to see if it is plugged in properly. If the plug is plugged
in properly but TV is still not turning on then plug something else into to
outlet to make sure it is working. If outlet is dead then you will have to
use another working outlet. Make sure that you are aiming the remote
control directly at the TV where the sensor is located and stay with in the
proper range; that may be required in order to receive the signal from
remote. Replace new batteries into the remote control and try turning it
on. If TV still not turning on after replacing remote batteries then there
could be a sensor problem. Try turning it on by pressing power button
on your TV.
TV has power but no sound and no picture:
• Switch to another channel. Possibly inactive channel may be tuned in.
Check the hook up of other components such as cable box, receiver and
set-top box. Check if you need to have any one of above components
turn on in order to have your TV on. Check if you have pressed
TV/Video button on your remote by mistake. This can bring your
monitor screen on. Press TV/Video button again to go to channel. Make
sure TV/VCR button on VCR is in correct position when using VCR.
Make sure that TV is tuned to the same channel as the switch on back of
VCR if you are watching a VCR.
Picture
Snowey Video:
• Check antenna connections. Adjust antenna location.
Multiple Images:
• Check your cable wire connection. Adjust antenna connection and
location.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents