American Standard 8345.118 Specification Sheet

CLINIC SERVICE SINK WITH STAINLESS
STEEL BOLT COVERS
• Vitreous china
• Flushing rim
• Siphon jet flushing action
• 1-1/2" brass top spud
• 4" floor outlet
• Stainless steel bolt covers
❏ 9504.010 Service sink
Available Components:
❏ 037640-0020A Cast metal loose strainer
❏
7832017.075 Stainless steel 10" (254mm)
guard (3 shown)
Nominal Dimensions:
749 x 508 x 457mm
(29-1/2" x 20" x 18")
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2 for Vitreous China Fixtures
To Be Specified:
❏ Faucet: 8345.118 service sink faucet with
brace, 152mm (6") elbow handles,
375mm (14-3/4") wall to spout outlet,
screwdriver stops
❏ Alternative Faucet:
❏ Pedal Valve: 7679.012 self-closing, double
pedal valve, screwdriver stops,
wall-mounted
❏ Flush Valve: Sloan Royal 117 HYVO with
25mm (1") offset
❏ Alternate Flush Valve
❏ Rim Guard: Stainless Steel 279mm (11")
7832.017 (3) if required
❏ Bedpan Cleaner 7880.024 assembly includes:
❏ 7837.024 Vacuum Breaker
❏ 7866.015 Nozzle with Hook
❏ 7679.012 Pedal Valve
❏ 7544.018 Loose Key Supply
❏ Strainer: 037640-0020A Metal Loose Strainer
❏ Optional Terrazzo Base (by others)
Available in White Only
© 2008 AS America Inc.
CLINIC SERVICE SINK
FINISHED WALL
83mm
(3-1/4)
25mm
(1) OFFSET
38mm (1-1/2)
O.D. TUBING
FLUSH PIPE
38mm
(1-1/2)
108mm (4-1/4)
1-1/2 SPUD
C/L OF
OUTLET
362mm
(14-1/4)
552mm
(21-3/4)
TERRAZO BASE
(BY OTHERS)
FINISHED
FLOOR
NOTES:
TERRAZZO BASE AS SHOWN, FIELD FABRICATED (BY OTHERS).
OUTLET FOR STANDARD DRAIN CONNECTION.
TO COMPLY WITH AREA CODE GOVERNING THE HEIGHT OF VACUUM
BREAKER ON FLUSH VALVE, THE PLUMBER MUST VERIFY
DIMENSIONS SHOWN FOR SUPPLY ROUGHING.
FLUSH VALVE AND FITTINGS NOT INCLUDED AND MUST BE ORDERED
SEPARATELY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within
the range of tolerances established by ANSI Standard A112.19.2. These
measurements are subject to change or cancellation. No responsibility is
assumed for use of superseded or voided pages.
M32
VITREOUS CHINA
1" C.W.T. OR N.P.T. SUPPLY
TO FLUSH VALVE
121mm
(4-3/4)
203mm
(8)
1/2 N.P.T.
178mm
711mm
SUPPLIES
(28)
C/L OF
SPOUT
BRACE
C/L
508mm
(20)
248mm
13mm
(9-3/4)
(1/2)
(2) 13mm X 25mm (1/2 X 1) SLOTS
ON 152mm (6) CENTERS
Revised 8/05
(7)
356mm
(14)
1067mm
(42)
457mm
(18)
254mm (10)
OR AS
REQUIRED