Load Clothes Into Dryer - Haier CHDE5300AW User Manual And Installation Instructions

Front load gas & electric dryer
Hide thumbs Also See for CHDE5300AW:
Table of Contents

Advertisement

Available languages

Available languages

LOAD CLOTHES INTO DRYER

• The appropriate load should be 1/3 ~ 1/2 of the drum volume. The drum
capaicity is 7.5 Cubic Foot. Avoid too much load, as space is needed to allow
clothes free rotation for uniform and wrinkle-proof drying.
• When drying big articles, only 2-3 pieces should be loaded at a time and
supplemented with small and medium-sized articles.
• For delicate clothes or less load, two towels may be added to get better
drying and wrinkle-proof effects.
• Do not excessively dry clothes to avoid wrinkles, shrinkage, roughness,
electro-static charge accumulation, and/or more lint.
Rack Dry cycle
• This program is designed specially for articles like sport shoes. During drying,
please make sure the articles are placed on the rack with no risk of
entangling the baffles while the drum is rotating.
NOTE: If drying rack is not in place, rolling inner tub could collide with drying
rack and causes damage to the dryer and drying rack.
Using the Dryer Rack
1. Open the dryer door.
2. Check that the drum is empty.
3. Remove the lint filter. (Fig 1)
4. Lift the dryer rack horizontally into the drum.(Fig.2)
Fig.2
5. Place the dryer rack so that the catches are inserted at the front and locked in
place.(Fig.3)
6. Insert the lint filter, must be inserted flush with the drum edge.(Fig.4)
Fig.1
Fig.3
Fig.4
English
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Chde5000awHde5000awHde5300awHdg5000awHdg5300aw

Table of Contents