Kenmore 25370319214 Use & Care Manual page 39

Installation (Continued)
To adjust the door stop:
Door stop is adjustable between 85 to 145 degrees.
NOTE
View shown is looking up at the bottom of the refrigerator
door.
/ op00
Adjustable Door Stop
1. Open door to provide access to screw.
2. Loosen screw.
3. Adjust door to desired location.
6. Ensure door stops in desired location before resuming
normal use.
Set Screw
0
Reficjhten Screw
To level the doors using the adjustable lower hinge (select
models):
1. Remove all food items from door bins on door being
adjusted.
2. Open doors to 90 degrees.
Bottom of Door
Adjustincj Door
4. Rotate door stop until it makes contact with the lower
hinge.
5. Refighten screw.
NOTE
Adjustable hinge should only be used after doors have been
leveled with rollers.