4-Wire Cord Connections - Haier CGDE450AW User Manual And Installation Instructions

ELECTRIC DRYER (GDE450AW)
4-Wire Cord Connections (US Models Only)
Green Ground
Screw
Neutral
Ground Wire
Red
Power Cord
1. Remove the screws securing the terminal block access cover and the strain
relief mounting bracket located on the back of the dryer upper corner.
2. Install a UL approved strain relief into the power cord entry hole of the
mounting bracket . Finger tighten the nut only at this time.
3. Remove the green neutral ground wire from the green ground screw located
above the terminal block.
Typical Conductor
Receptacle
Typical 4
Conductor Cord
Green Power Cord
Ground Wire
Strain Relief
Mounting Bracket
Brass Terminal
Terminal
Black
White
Nut
Black 240V
White Neutral
Red 240V
Green Ground
English
Block
Tighten Nut to
These Threads
14