iMPORTANT." The gas installation must conform with local codes, or in the absence of local codes, with the National Fuel Gas
Code, ANSI Z223.1iNFPA 54 or the Canadian Natural Gas and Propane Installation Code, CSA B149.1.
The dryer must be electrically grounded in accordance with local codes, or in the absence of local codes, with the National
Electrical Code, ANSIiNFPA 70 or Canadian Electrical Code, CSA C22.1.
For your safety,
in this manual
must be followed
the risk of fire or explosion,
or to prevent property
injury, or death.
- Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this
or any other appliance.
- WHAT TO DO iF YOU SMELL GAS:
• Do not try to light any appliance.
• Do not touch
do not use any phone in your building.
• Clear the room, building,
or area of all occupants.
carl your gas supplier
from a neighbor's
phone. Follow the gas supplier's
• if you cannot reach your gas supplier,
call the fire department.
must be performed
by a qualified
the gas supplier.
Gas leaks cannot always be detected
Gas suppliers recommend
that you use a gas detector approved by UL or CSA.
For more information,
contact your gas supplier.
If a gas leak is detected, follow the "What to do if you smell gas" instructions.
IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electric shock, or injury to persons when using the dryer, follow basic precautions,
including the following:
Read all instructions before using the dryer.
Do not place items exposed to cooking
oils in your dryer.
with cooking oils may contribute
reaction that could cause a load to catch fire.
Do not dry articles that have been previously cleaned in,
washed in, soaked in, or spotted with gasoline, dry-
cleaning solvents, or other flammable or explosive
as they give off vapors that could ignite or
Do not allow children to play on or in the dryer. Close
of children is necessary when the dryer is
used near children.
Before the dryer is removed from service or discarded,
remove the door to the drying compartment.
Do not reach into the dryer if the drum is moving.
Do not install or store the dryer where it will be exposed
to the weather.
Do not tamper with controls.
Do not repair or replace any part of the dryer or attempt
any servicing unless specifically
Use and Care Guide or in published user=repair
that you understand and have the skills to
Do not use fabric softeners or products to eliminate static
by the manufacturer
of the fabric
softener or product.
Do not use heat to dry articles containing foam rubber or
similarly textured rubber-like
Clean lint screen before or after each load.
Keep area around the exhaust opening and adjacent
areas free from the accumulation
of lint, dust,
The interior of the dryer and exhaust vent should be
cleaned periodically by qualified service personnel.
See "Electrical Requirements" located in the installation
instructions for grounding instructions.
SAVE THESE INSTRUCTIONS