Kenmore 29" Installation Instructions Manual page 19

29" wide electric models

Hide thumbs Also See for 29":

Available languages

Original version

Rotate outer door

Take outer door and rotate in 180° and set it back down on

inner door. Be certain to keep cardboard spacer centered

between doors. Reattach outer door panel to inner door

panel so handle is on the side where hinges were just

removed. Insert 4 door screws.

Flip door over

Flip door over so handle side is down.

Attach

door hinges

Reattach door hinges to dryer door so that the larger hole is

at the bottom of the hinge.

Remove door strike

Remove door strike from dryer cabinet and set aside.

10.

Remove and transfer

hinge hole plugs

Use a small, flat-blade screwdriver to gently remove 4 hinge

hole plugs on left side of dryer cabinet. Transfer plugs into

hinge holes on opposite side of dryer cabinet.

dryer cabinet

NOTE: Two people may be needed to reinstall door.

Insert screws into the bottom holes on left side of dryer

cabinet. Tighten screws halfway. Position door so large end

of door hinge slot is over screws. Slide door up so screws

are in bottom of slots. Tighten screws. Insert and tighten top

screws in hinges.

Page 19

110.60022010