Kenmore 27" Installation Instructions Manual page 18

4, Remove screws from hinges
Remove screws attaching hinges to door.
5, Remove screws from door
Ii \
Remove screws at top, bottom, and side of door
(6 screws). Keep door screws separate from hinge screws
as they are different sizes. Holding door over towel on
dryer, grasp sides of outer door and lift to separate it from
inner door.
NOTE: Do not pry apart with putty knife or screwdriver.
Do not pull on door seal or plastic door catches.
Flip door over so handle side is down.
fS, Attach door hinges
Reattach door hinges to dryer door so that the larger hole is
at the bottom of the hinge.
Take outer door and rotate it 180° and set it back down on
inner door. Be certain to keep cardboard spacer centered
between doors. Reattach outer door panel to inner door
panel so handle is on the side where hinges were just
removed. Insert 5 door screws.
18