Checking The Meter - Accu-Chek Mobile User Manual

7

Checking the meter

Y Y You can check whether the meter delivers correct
results. To perform this control test, a glucose control
solution is applied to the test area instead of blood. At
the end of the test, the meter automatically checks
whether the result obtained with glucose control solu-
tion is correct and informs you of the result.
Always perform a control test using Accu-Chek Mobile
control solutions
after you have inserted a new test cassette,
after you have changed the batteries,
after you have cleaned the cassette and the inside of
the meter,
if you are in doubt about a result.
Please contact the Accu-Chek Enquiry Line on where
you can obtain the control solutions.
Different control solutions are sold in different coun-
tries. The control solutions have different coloured
labels (red, blue or white). At the end of the control test,
the meter asks you to enter the colour of the label on
the control solution you have used (see Chapter 7.2).
The meter offers you a choice of all three colours, even
if you only have one or two control solution(s) to
choose from.
Store the control solution out of the reach of
children. There is a danger of choking if the
applicator or the cap are swallowed.
Visually impaired people should not carry out a
control test without assistance from a sighted
person.
Checking the meter
165