Connecting Your Monitor; Connecting The Blue Vga Cable; Connecting The White Dvi Cable (For E2014H Only) - Dell E1914H User Manual

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect either the white (digital DVI-D) or the blue (analog VGA)
display connector cable to the corresponding video port on the back
of your computer. Do not use both cables on the same at the same
time. Use both the cables only when they are connected to two
different computers with appropriate video systems.

Connecting the blue VGA Cable

Connecting the white DVI cable (for E2014H only)

Note: The graphics are used for the purpose of illustration only.
Appearance on the computer may vary.
Setting Up the Monitor 25
