Weslo Pursuit T 39 Exercise Bike User Manual page 5

2. Orient the Front Stabilizer (2) so that the large holes
are facing the Frame (1). Attach the Front Stabilizer
to the Frame with two M8 x 73mm Button
Screws (33).
3. Attach the Seat (12) to the Seat Post (5) with four
M8 Split Washers (42) and four M8 Nylon
Locknuts (10). Note: The Split Washers and the
Nylon Locknuts may be preattached to the
underside of the Seat.
4. Turn the Seat Knob (9) counterclockwise and remove
it from the Frame (1). Next, insert the Seat Post (5)
into the Frame. Adjust the Seat Post to the desired
height and insert the Seat Knob (9) through the indi-
cated hole in the Frame into one of the adjustment
holes in the Seat Post. Then, turn the Seat Knob
clockwise until it is tight. Make sure that the Seat
Knob is firmly engaged in one of the adjustment
holes in the Seat Post.
2
33
2
Large
Holes
3
12
42
10
5
4
1
5
1
42
10
Adjustment
Holes
5
Hole
9