Haier AS072XHERA Operation And Installation Manual page 19

Operation
Remote controller operation
(1) After unit start, select your desired operation mode.
Operation mode will be displayed on LCD.
(2) TIMER mode selection
Press TIMER button to change TIMER mode.
Every time the button is pressed, display changes as follows:
ON
Remote
AM
12:00
controller
TIMER ON
Select your desired TIMER mide (TIMER ON or TIMEROFF) ON or OFF
will flash.
(3) Timer setting for TIMER ON
Press HOUR button.
Every time the button is pressed, time increases 1 min. If button is
kept pressed, time will change quickly.
Every time the button is pressed, time decreases 1 min. If button
is kept pressed, time will change quickly.
Time will be shown on LCD.
It can be adjusted within 24 hours.
AM refers to morning and PM to afternoon.
(4) Time confirming for TIMER ON
After time setting, press TIMER button to confirm,"
while " " starts blinking.
OFF
(5) Time setting for TIMER OFF
Follow the same procedure in "Time setting for TIMER ON".
(6) Time confirming for TIMER OFF
After time setting, press SET button to confirm, "
Time displayed: Unit start or stop at x hour x min
To cancel TIMER mode
Just press TIMER button several times until TIMER mode disappears.
According to the Time setting sequence of TIMER ON or TIMER OFF,either ON-OFF or OFF-
ON can be achieved.
TIMER ON-OFF
OFF ON
AM
12:00
12:00
PM
TIMER OFF TIMER ON-OFF
OFF
17
Timer on-off function
OFF BLANK
12:00
PM
" stops blinking,
ON
" stops flashing.
A
TEMP
ON
OFF
FAN
HEALTH
1
HEALTH AIRFLOW
MODE
SLEEP FRESH SWING
SET
CLOCK
TIMER
STERILIZE
5
RESET CODE LIGHT LOCK