Cool, Heat And Dry Operation - Haier AS072AZBDA Operation Manual

Operation

COOL, HEAT and DRY operation

Recommendations:
(1) Unit start
Press ON/OFF button, unit starts.
Previous operation status appears on display. (Not Timer setting)
Power indicator on indoor unit lights up.
(2) Select operation mode
Press MODE button. For each press,
operation
AUT COOL
Unit will run in operation mode displayed on
LCD.
(3) Select temp.setting
Press TEMP. button
Every time the button is pressed, temp. setting increases 1
Every time the button is pressed, temp. setting decreases 1
Unit will start running to reach the temp. setting on
(4) Fan speed selection
Press FAN button. For each press, fan speed
changes
MED
LO
Unit runs at the speed displayed on LCD.
In HEAT mode, warm air will blow out after a short period
of time due to cold-draft prevention function.
In DRY mode, when room temp. becomes 2
temp. setting, unit will run intermittently at LO speed
regardless of FAN setting.
Hints
Remote controller can memorize each operation status. When starting it next time,
just press ON/OFF button and unit will run in previous status.
On cooling only unit, heating mode is not available.
Use COOL in summer.
Use HEAT in winter.
Use DRY in spring, autumn and in damp climate.
DR HEA FA
HI AUT
AUT
o
o
C
o
C
COOL operation starts when room
temp. is higher than temp. setting.
Temp. setting+2
C higher than
Temp.
AUTO
AM
TEMP
ON
5
1
OFF
SWING FAN
6
MODE
SLEEP
2
CLOCK SET
TIMER
LOCK RESET
Ultra-low air flow
o
C
On reaching temp. setting,unit
will run in mild DRY mode.
3
4