1. Unit start
Press ON/OFF on the indoor unit, or press ON/OFFon
the remote controller, unit starts.
Previous operation status appears on LCD display (no
timer and sleep).
2.Select operation mode
Press MODE button. For each press, operation mode
changes as follows:
Then Select FAN operation
3.Fan speed selection
Press FAN button. For each press, fan speed changes as
Press ON/OFF button, the unit stops.
About FAN operation
In FAN operation mode, the unit will not operate in
COOL or HEAT mode but only in FAN mode. AUTO is
not available in FAN mode. And temp. setting is disabled.
In FAN mode, SLEEP operation is not available.