1. Manuals
  2. Brands
  3. Vonnic Manuals
  4. DVR
  5. VVR4004HMFD
  6. User manual

Vonnic VVR4004HMFD User Manual

H.264 video compression digital video recorder
Hide thumbs
Table of Contents

Advertisement

Quick Links

Ver. 1.0.1
H.264 Video Compression

Digital Video Recorder

User Guide
About This User Guide
Before operating the unit, please read this user guide thoroughly and retain it for future
reference.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VVR4004HMFD and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Vonnic VVR4004HMFD

Summary of Contents for Vonnic VVR4004HMFD

  • Page 1: Digital Video Recorder

    Ver. 1.0.1 H.264 Video Compression Digital Video Recorder User Guide About This User Guide Before operating the unit, please read this user guide thoroughly and retain it for future reference.
  • Page 2 Warning Cautions 1. Read User Guide – After unpacking this product, please read the user guide carefully, and follow all the operating and other instructions. 2. Power Sources – This product should be operated only from the type of power source indicated on the label.
  • Page 3 Notes Handling  Please retain the original shipping carton and/or packing materials supplied with this product. To ensure the integrity of this product when shipping or moving, repackage the unit as it was originally received. Do not use liquids, such as aerosol spray, near this product.

  • Page 4: Table Of Contents

    3-6. VVRHHD1002D ............................ 18 4. Front Panel Controls ........................... 20 4-1. VVR4004SEFD, VVR4008SE, VVR4016SE ................... 20 4-2. VVR4004HMFD, VVR4008HM, VVR4016HM, VVR4008HFD, VVR4016HFD ........20 4-3. VVR4016HSFD, VVRHD1620M, VVRHHD1002D................21 5. Rear Panel Connectors ..........................22 5-1. VVR4004SEFD, VVR4008SE, VVR4016SE ................... 22 5-2.
  • Page 5 8-2. RECORD Setup ............................. 31 8-3. DEVICE Setup ............................33 8-5. STORAGE Setup ........................... 35 8-6. SYSTEM Setup ............................38 8-7. SECURITY Setup ........................... 41 8-8. NETWORK Setup..........................43 8-9. CONFIG Setup ............................45 9. OPERATION ..............................47 9-1. Live Display Mode ..........................47 9-2.
  • Page 6 12-5-2. Full Screen Display ........................70 12-5-3. Playback Buttons ........................71 12-5-4. Timeline Bar ..........................71 12-5-5. Backup ............................72 12-6. Local Setup ............................73 12-6-1. General ............................73 12-6-2.Site ............................... 74 12-6-3. Event ............................76 12-6-4. Event Search ..........................77 12-6-5.
  • Page 7 15-1-3. Playback ............................. 94 15-2. Viewer for Android Phone ........................ 95 15-2-1. Live/Playback ..........................95 Page 7...

  • Page 8: Product Components

    1. Product Components Please make sure the following components are included as specified below. DVR Set Client Software CD, User Guide Remote Control , Battery1.5V Mouse HDD Mounting Bracket & Screw* SATA Cable, SATA Power Cable HDD & DVD-RW Mounting Screw HDD &...

  • Page 9: Features

    2. Features H.264 video compression • QUADPLEX: Simultaneous live or playback while recording, network transfer, and • backup USB 2.0 port for backup, firmware upgrade, configuration export/import, or USB • mouse Individual channel operation such as FPS, quality, recording mode, & detection zone •...

  • Page 10: Specifications

    3. Specifications Please note that specifications and unit exterior design are subject to change without notification 3-1. VVR4004SEFD, VVR4008SE, VVR4016SE VVR4004SEFD VVR4008SE VVR4016SE Model Recording Performance D1 * 120FPS CIF * 240FPS CIF * 480FPS Channel 4 channels 8 channels 16 channels Input Input Level...

  • Page 11: Vvr4004Hmfd, Vvr4008Hm, Vvr4016Hm

    3.4 Lbs (6.6 Lbs) Dimension Unit Dimension (W x H x D) 10.6" x 7.5" x 1.8" 10.6" x 7.5" x 1.8" 13.3" x 10.2" x 2.5" 3-2. VVR4004HMFD, VVR4008HM, VVR4016HM VVR4004HMFD VVR4008HM VVR4016HM Model Recording Performance D1 * 120FPS...
  • Page 12 Sensor Input 4ch (NC/NO Selectable) Alarm Alarm Output 1 Alarm out Compression H.264 Multi-operation QUADPLEX (Playback/Record/Network/Backup) 120fps 120fps 120fps Analog Half D1 120fps 240fps 240fps Resolution 120fps 240fps 480fps 1280X720 Resolution 1920X1080 Record Recording quality grade 5 Grades Recording Mode Continuous/Schedule/Motion/Sensor/Manual Motion Detection Motion detection setup by Grid...

  • Page 13: Vvr4008Hfd, Vvr4016Hfd

    DLS (Day Light Saving) Internal Beep By Alarm, Motion, Video Loss, HDD error Features S/W Upgrade USB Flash drive, Remote Network Power Power Supply Voltage DC 12V 5A Allowable operation temperature 5°C - 40°C Allowable operation humidity 0 - 90 % Weight Unit Weight (Gross weight) 3 Lbs (4.6 Lbs)

  • Page 14: Vvr4016Hsfd

    Playback Speed x1/4 ~ x64 Search Mode Timeline, Event, Archive, Log Interface Type Serial ATA I Capacity of 1 HDD Internal HDD Number 2EA (3EA without DVD-RW) ESATA Storage USB Flash drive Video & Still Image Backup USB External HDD Video &...
  • Page 15 HDMI 1 HDMI (Max. 1080p) HD-SDI LOOP 16 channels 1 channel SPOT 4 channel Input & Output 16 Line input & 1 Line output Audio Audio Codec G.711 (ADPCM) Sensor Input 16ch (NC/NO Selectable) Alarm Alarm Output 4 Alarm out Compression H.264 Multi-operation...

  • Page 16: Vvrhd0405M, Vvrhd0805M, Vvrhd1620M

    Network Interface 10/100/1000 base-TX Ethernet (RJ-45) Network Streaming CIF/D1 @ 480fps Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade, Web viewer (1:1) Two Way Audio 3G Mobile Viewer (1:1) Live, Search, PTZF, Two Way Audio Network Access MAC viewer (1:1) Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade Live, Search, Backup, PTZF, Remote Setup, Remote Upgrade, Multi-sites Monitoring SW (1:n)
  • Page 17 Resolution 1920X1080 20fps 40fps 80fps Recording quality grade 5 Grades Recording Mode Continuous/Schedule/Motion/Sensor/Manual Motion Detection Motion detection setup by Grid Recording by channel’s Resolution Pre Recording Min. 15 seconds and Max. 20 minutes Post Recording Min. 10 seconds and Max. 60 seconds Display Frame Rate Real time...

  • Page 18: Vvrhhd1002D

    Allowable operation humidity 0 - 90 % 0 - 90 % Weight Unit Weight (Gross weight) 9 Lbs (13.6 Lbs) 15.0 Lbs (19.8 Lbs) 17.00" x 16.92" x Dimension Unit Dimension (W x H x D) 14.96" x 13.38" x 2.83" 3.86"...
  • Page 19 ESATA USB Flash drive Video & Still Image Backup USB External HDD Video & Still Image Network Video & Still Image USB Port 2 (Front 1, Rear 1) Menu Display User I/F Input Method Mouse, IR Remote control, Key Board Control Serial PTZ control 2 RS-485...

  • Page 20: Front Panel Controls

    Power Indicator Indicator LED when DVR is powered ON. USB Port Allows the user to connect a USB mouse or USB flash drive for BACK UP. 4-2. VVR4004HMFD, VVR4008HM, VVR4016HM, VVR4008HFD, VVR4016HFD Optical Drive Door Camera Selection Allows the user to select specific channels for single channel view.

  • Page 21: Vvr4016Hsfd, Vvrhd1620M, Vvrhhd1002D

    Allows the user to change playback settings, set manual RECORDING, and enter PLAYBACK mode. Escape (ESC) Exit from current menu or stop playback. Eject Ejects optical drive disc tray. Recording Indicator Indicator LED when a specific CHANNEL is recording. Setup Allows the user to enter the SETUP menu.

  • Page 22: Rear Panel Connectors

    Allows the user to select specific channels for single channel view. Playback Buttons Allows the user to change playback settings, set manual RECORDING, and enter PLAYBACK mode. Sequence Allows the user to Enable/Disable Sequence in LIVE MODE. Allows the user to enter the PTZ menu. Setup Allows the user to enter the SETUP menu.

  • Page 23: Vvr4004Hmfd, Vvr4008Hm, Vvr4016Hm, Vvr4008Hfd, Vvr4016Hfd

    5-2. VVR4004HMFD, VVR4008HM, VVR4016HM, VVR4008HFD, VVR4016HFD Cooling Fan Video Input & Video Output Audio Input HDMI Video Output RS 232 Terminal (For testing purposes) VGA Output eSATA Port Network RS-45 Ethernet Port USB Port RS-485 PTZ Camera control terminal DC12V Power Input 5-3.

  • Page 24: Vvrhd0405M, Vvrhd0805M, Vvrhd1620M

    5-4. VVRHD0405M, VVRHD0805M, VVRHD1620M Cooling Fan HD-SDI Video Input Audio Input HDMI Video Output RS 232 Terminal (For testing purposes) VGA Output eSATA Port Network RS-45 Ethernet Port USB Port RS-485 PTZ Camera control terminal DC12V Power Input HD-SDI Video Input Audio Input RS 232 Terminal (For testing purposes) VGA Output...
  • Page 25 Video Input & Loop Out Video Output Audio Input RS 232 Terminal (For testing purposes) VGA Output HDMI Output USB Port RS-485 PTZ Camera control terminal Network RS-45 Ethernet Port eSATA Port RS-485 Termination Sensor In terminal DC12V Power Input Page...

  • Page 26: Remote Control

    6. Remote Control RECORD Manual recording DISPLAY Display of Full, Quad,9 or 16 split screen F/REW Jump 60 seconds backward PLAY/PAUSE Play/Pause F/ADV Jump 60 seconds forward Rewind BACKUP Backup still or video data Fast Forward ALARM Disable alarm operation SETUP Setup menu screen DVR ID (ID Button + DVR ID number)

  • Page 27: Connection Guide

    7. Connection Guide 7-1. Connecting the Monitor There are three available monitor outputs on the DVR. High-Definition Multimedia Interface – HDMI ( Not for VVR4004SEFD, VVR4008SE, VVR4016SE  Video Graphics Array – VGA Mini-Sub D15  Composite Monitor Output – BNC ...

  • Page 28: Setting The Remote Controller Id

    7-8. Setting the Remote Controller ID When more than one HD DVR is installed in the same location, it is possible to use one remote controller to control multiple DVRs – up to 99 DVRs. To control multiple DVRs, the remote controller ID and the DVR remote control ID must match.

  • Page 29: Setup Menu

    8. SETUP MENU Use the setup menu to configure all of the DVR settings, schedule recording, and networking. To enter SETUP, press the SETUP button on the front of the DVR or remote control or by using the mouse. RIGHT CLICK to open the SUB MENU. LEFT CLICK SETUP and enter the USER PASSWORD using the VIRTUAL KEYBOARD.

  • Page 30: Display Setup

    8-1. DISPLAY Setup  OSD – ON/OFF (Allows the user to Turn ON/OFF the On Screen Displays)  OSD CONTRAST – 50 ~ 100 (Allows the user to Set the transparency of the setup window)  SEQUENCE – ON/OFF (Allows the user to Turn ON/OFF the main monitor Sequence) ...

  • Page 31: Record Setup

    NOTE: Recording will stop for a few seconds after applying the CHANNEL NAME change. o NAME – Press CONFIRM on the WARNING prompt window to enter the VIRTUAL KEYBOARD. Using the VIRTUAL KEYBOARD, enter the desired CHANNEL NAME and press OK to apply the changes. o COVERT –...
  • Page 32 o QUALITY – LEVEL 1 ~ LEVEL 5 (Allows the user to change the recording QUALITY of the selected CHANNEL) o RECORDING – CONTINUOUS, MOTION, SENSOR, SCHEDULE, DISABLE (Allows the user to change the RECORDING type of the selected CHANNEL) o SENSOR RECORDING –...

  • Page 33: Device Setup

    8-3. DEVICE Setup  ALARM-OUT – SENSOR, MOTION, VIDEO LOSS, HDD ERROR (Allow the user to set ALARM-OUT relay) o ALARM-OUT – Allows the user to select a specific alarm output terminal o SENSOR IN – Allows the user to set ALARM-OUT when SENSOR-IN is triggered. o MOTION ON –...
  • Page 34 ALL – ALARM-OUT enabled when HDD ERROR or VIDEO LOSS is detected. HDD ERROR – ALARM-OUT enabled when HDD ERROR is detected. VIDEO LOSS – ALARM-OUT enabled when VIDEO LOSS is detected.  CONTROLLER & PTZ – Allows the user to setup CONTROLLER & PTZ o CONTROLLER –...

  • Page 35: Storage Setup

    NOTE: Camera noise will be detected as MOTION depending on MOTION SENSITIVITY.  KEY TONE – OFF, ON (Allows the user to turn KEY TONE OFF or ON)  REMOTE CONTROL ID – 00 ~ 99 (Allows the user to set REMOTE CONTROL ID) ...
  • Page 36 NOTE: The user will not be able to recover the RECORDED DATA from a formatted HDD. FORMAT- Select the HDD to format and select YES to FORMAT the HDD.  DISK INFO – Displays HDD info (Displays the following info; HDD SIZE, REMAIN, START TIME, LAST TIME, HDD #, HDD MODEL NAME, HDD TEMPERATURE, HDD POWER, HDD HEALTH) DISK INFO DETAIL –...
  • Page 37 HELP – Displays S.M.A.R.T HELP information.  RECORDING LIMIT – OFF, ON (Allows the user to set the RECORDING LIMIT) o RECORDING LIMIT DAYS – 1 DAY ~ 90 DAYS (Allows the user to set RECORDING LIMIT DAYS)  S.M.A.R.T – ON, OFF (Allows the user to set S.M.A.R.T feature ON or OFF) o TEMPERATURE LIMIT –...

  • Page 38: System Setup

    8-6. SYSTEM Setup  DVR ID – Allows user to change the DVR ID  DESCRIPTION – Displays the following system information; HARDWARE VERSION, SOFTWARE VERSION, STORAGE SIZE, IP ADDRESS, MAC ADDRESS, DDNS STATUS  LANGUAGE – ENGLISH, FRENCH, GERMAN, JAPANESE, CHINESE (Allows the user to change the LANGUAGE setting) ...
  • Page 39 NTP – Allows the user to set the following options; PRIMARY SNTP SERVER, SECONDARY SNTP SERVER, TIME ZONE, CONNECTION MODE (TIME, INTERVAL), CONNECTION PERIOD o PRIMARY SNTP SERVER – PRIMARY SNTP (Simple Network Time Protocol) SERVER o SECONDARY SNTP SERVER – SECONDARY SNTP (Simple Network Time Protocol) SERVER o TIME ZONE –...
  • Page 40 SEND EMAIL – Allows the users to set the following options; TRANSMISSION MODE, IP NOTIFICATION, EVENT ALARM, S.M.A.R.T, MAIL PORT, SECURE OPTION, MAIL TO, MAIL SERVER, ID, PASSWORD, MAIL FROM. o TRASMISSION MODE – IMAGE (Transmits an IMAGE of the triggered ALARM-OUT CHANNEL) or Text o IP NOTIFICATION –...

  • Page 41: Security Setup

    8-7. SECURITY Setup  USER AUTHENTICATION – Allows the specific users to access a function. SETUP – Allow or Deny specific user to enter SETUP. PB – Allow or Deny specific user for PLAYBACK. PTZ – Allow or Deny specific user for PTZ Control. R/OFF –...
  • Page 42 o USER PASSWORD – Enter the following information to change the USER PASSWORD; USER, CURRENT, NEW, CONFIRM.  AUTHORITY OF PLAYBACK – Allows specific users AUTHORITY OF PLAYBACK per CHANNEL. Page...

  • Page 43: Network Setup

    8-8. NETWORK Setup  PORT – NETWORK PORT (Allows the user to change the DVR PORT)  NETWORK AUDIO PORT - Set the port for the audio data. Default is 5446 and it has to be the next number of the DVR port. NOTE: The DEFAULT PORT is used as a primary port to create remote connections.
  • Page 44 o SERVER 2 – Allows the user to user a specific DDNS Server. o DDNS SERVER NAME – Allows the user to enter the specific DDNS Server NAME. o DDNS ID – Allows the user to enter specific DDNS ID. o DDNS PASSWORD –...

  • Page 45: Config Setup

    8-9. CONFIG Setup  SAVE SETUP TO A USB – Allows the user to SAVE SETUP TO A USB.  LOAD SETUP FROM A USB – Allows the user to LOAD SETUP FROM A USB. Page...
  • Page 46  LOAD DEFAULT – Allows the user to LOAD DEFAULT settings.  LOAD FACTORY DEFAULT – Allows the user to LOAD FACTORY DEFAULT settings. Page...

  • Page 47: Operation

    9. OPERATION 9-1. Live Display Mode A live image can be selected by pressing the corresponding number key on the DVR front panel or remote control or mouse. Depending on the model of the DVR, the LIVE DISPLAY MODE will be different. Double LEFT CLICK the video image to change views.

  • Page 48: Search

    Indicates SENSOR RECORDING is in progress. Indicates DVR is LOCKED or UNLOCKED. Indicates AUDIO is RECORDING OR MUTED. Indicates ALARM-OUT is set. Indicates the ALARM-OUT is activated. Indicates the EVENT has been trigged. Indicates that a network client is connected to the DVR. Indicates SEQUENCE is ON OR OFF.
  • Page 49  TIMELINE – Allows the user to playback using the TIMELINE BAR. NOTE: DATES with RECORDED DATA are displayed in blue. TIMELINE BAR – Allows the user to find the specific hour and minutes for PLAYBACK. To change the TIMELINE BAR from HOURS to MINUTES, LEFT CLICK the icon on the upper right hand corner.
  • Page 50  EVENT – Allows the user to PLAYBACK from a triggered EVENT. Select the CHANNEL and TYPE of EVENT triggered to open the EVENT LOG. M – MOTION S – SENSOR R – MANUAL RECORDING C – CONTINOUS Left Click on an EVENT list to PLAYBACK the triggered EVENT. ...
  • Page 51  ARCHIVE – Allows the user to View ARCHIVED BACKUPS. ARCHIVE – Left Click a DATE to display the ARCHIVE LOG. From the ARCHIVE LOG, SELECT the ARCHIVE BACKUP EVENT to open the BACKUP WINDOW. In the BACKUP WINDOW, Select the BACKUP DEVICE (USB STICK, DVD-RW) and Left Click BACKUP to start the BACKUP PROCESS.

  • Page 52: Playback

    9-4. Playback 1 CH SPLIT – Allows the user to switch to 1 CH Full screen. 4 CH SPLIT – Allows the user to switch to 4 CH SPLIT. 8 CH SPLIT – Allows the user to switch to 8 CH SPLIT. 16 CH SPLIT –...

  • Page 53: 9-5.Backup

    9-5.Backup LEFT CLICK the BACKUP icon to open the BACKUP Window during PLAYBACK. 1. ARCHIVE – Still Image, ASF, AVI (Allows user to select BACKUP type) o STILL IMAGE – BACKUP STILL IMAGE. o NSF – BACKUP in NSF FORMAT. o AVI –...

  • Page 54: 9-6.Backup Data Playback

    4. In the CHANNEL BACKUP Window, select the appropriate CHANNELS and SET the DURATION and Left Click YES to start the BACKUP process. NOTE: USB STICK and DVD-R MEDIA TYPE will only be available to BACKUP in MINUTES. USE HDD BACKUP will only be available to BACKUP in HOURS. o CHANNEL –...

  • Page 55: Nsf Format - Hd Player

    2. Otherwise, the video and time stamp over video can’t be properly playback and displayed on Window Media Player™. 9-6-2. NSF Format - HD Player NSF format: NSF format video can be played back using the HDplayer that the DVR copies to “DvrPlayer”...

  • Page 56: 9-7.Ptz Control

    9-7.PTZ Control  INITIALIZE – Initialize the PTZ setting on the selected CHANNEL.  PAN / TILT – PAN / TILT the selected CHANNEL PTZ.  ZOOM / FOCUS – ZOOM / FOCUS the selected CHANNEL PTZ.  OSD – Select OSD to enter the PTZ menu. ...

  • Page 57: Remote Setup

    10. Remote Setup Remote Setup Access from CMS: Select REMOTE SETUP button.  Remote Setup Access from WEB VIEWER: Select SETUP button.  Remote Setup Access from Single Client VIEWER: RIGHT-Click over live display and select  REMOTE SETUP button. Then the setup window is displayed.

  • Page 58: Display

    10-1. DISPLAY  OSD – ON/OFF (Turn ON/OFF the On Screen Displays)  OSD CONSTRAST – 50 ~ 100 (Set the transparency of the setup window)  SEQUENCE – ON/OFF (Turn ON/OFF the Sequence)  SEQUENCE-DWELL TIME – 3 ~ 60 SECONDS (Set the SEQUENCE-DWELL TIME) ...

  • Page 59: Device

    o QUALITY – LEVEL 1 ~ LEVEL 5 (Allows the user to change the recording QUALITY of the selected CHANNEL) o RECORDING – CONTINUOUS, MOTION, SENSOR, SCHEDULE, DISABLE (Allows the user to change the RECORDING type of the selected CHANNEL) o SENSOR RECORDING –...

  • Page 60: Storage

    o SPEED – Allows the user to select CONTROLLER SPEED o ID – Allows the user to select CONTROLLER SPEED  CAMERA PTZ – Allows the user to select PTZ CAMERA CHANNEL o NAME – Allows the user to select PTZ protocol o SPEED –...

  • Page 61: System

    10-5. SYSTEM  DVR-ID – Allows the user to change the DVR ID  DATE FORMAT – Allows the user to change the DATE FORMAT display from the following; YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY, YYYY-MM-DD, MM-DD-YYYY, DD-MM-YYYY.  NTP – OFF, ON (Allows the user to set NTP OFF or ON) o PRIMARY SNTP SERVER –...

  • Page 62: Network

    o MAIL PORT – 1 ~ 99 (Allows the user to set E-MAIL PORT) o SECURE OPTION – NONE, SSL, TLS (Allows the user to select E-MAIL SECURE OPTION) o MAIL TO – Recipient’s email address. o MAIL SERVER – Outgoing mail server address. o ID –...

  • Page 63: Remote Upgrade

    o DDNS SERVER 2 NAME – Allows the user to user a specific DDNS SERVER. o DDNS SERVER 2 ID – Allows the user to enter specific DDNS ID. o DDNS SERVER 2 PASSWORD – Allows the user to enter specific DDNS PASSWORD.

  • Page 64: Ddns Registration

    11. DDNS Registration DDNS (Dynamic Domain Name System) allows a domain name to be constantly synchronized with a dynamic IP address. It allows using a dynamic IP address to be associated with a static domain name. Once the setting is completed, the DDNS address will be: http://hostname.microcamddns.com For example, if you enter the host name as “vvr4004xxxx”, then the address will be: http://vvr4004xxxx.microcamddns.com...
  • Page 65 Set DDNS as SERVER1 and click button. Then EASY DDNS menu will display.  Automatic Host name registration Click AUTO button. Then the MAC Address of DVR will be registered automatically as a host name on DDNS.  Manual Host name registration Click button.

  • Page 66: Network Viewer

    6. In order to check the DDNS connection status, Right-click of mouse over the live screen and select SYSTEM INFORMATION. 12. NETWORK VIEWER 12-1. PC System Requirement Minimum System Requirements o Windows XP, Windows 7 Operating System o Intel Dual Core 2.0 Ghz Processor o 2GB RAM o 256 MB+ nVidia or ATi Video Card o DirectX 9.0C or Higher...

  • Page 67: Live Mode

    2. Select a destination folder and click “NEXT” 3. Select the Program Folder and click “NEXT” 4. The installation Process will begin. 5. After the installation is completed, “Microcam Single Client” icon will be displayed on the desktop. 12-3. Live Mode Button Function Description...
  • Page 68 DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE Allows the user to control the PTZ camera SCAN Allows the user to scan the PTZ camera TOUR Allows the user to tour the PTZ camera MENU Allows the user to open the PTZ menu...

  • Page 69: Search Mode

    12-4. Search Mode Button Function Description DATE & TIME Displays the recording time of the data selected CONNECT/DISCONNECT Connect or Disconnect network connection LIVE MODE Switches to LIVE MODE CAPTURE Capture a still image in SEARCH MODE MARK IN Allows the user to set the starting time for video BACKUP MARK OUT Allows the user to set the ending...

  • Page 70: Operation

    PLAYBACK BUTTONS Playback buttons DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 12-5. Operation 12-5-1. Digital Zoom Digital Zoom allows the user to digitally zoom into any area during single channel viewing. Use the mouse scroll to digitally zoom in and zoom out.

  • Page 71: Playback Buttons

    A single CHANNEL can be displayed in FULL SCREEN by selected FULL SCREEN in the SUB MENU. The SUB MENU can be opened by right clicking on a specific CHANNEL. NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing. 12-5-3.

  • Page 72: Backup

    12-5-5. Backup CAPTURE – Allows the user to CAPTURE a still image. MARK IN – Allows the user to set the starting time for video BACKUP. MARK OUT – Allows the user to set the ending time for video BACKUP. BACKUP –...

  • Page 73: Local Setup

    12-6. Local Setup 12-6-1. General  SECURITY OPTION o STARTUP – Allows the user to enter a password during UMS STARTUP. o SHUTDOWN – Allows the user to enter a password during UMS SHUTDOWN. o SEARCH – Allows the user to enter a password during SEARCH. o LIVE MONITORING –...

  • Page 74: 12-6-2.Site

     SAVE PATH o CAPTURE – Allows the user to change the CAPTURE SAVE PATH. o BACKUP – Allows the user to change the BACKUP SAVE PATH.  MISCELLANEOUS o DISPLAY NETWORK STATISTICS – Allows the user Enable or Disable DISPLAY NETWORK STATISTICS.
  • Page 75 o SITE NAME – Allows the user to enter the specific SITE NAME. o IP ADDRESS – Allows the user to enter the specific IP ADDRESS. o PORT NO. – Allows the user to enter the specific PORT NO. o ID – Allows the user to enter the specific ID. o PASSWORD –...

  • Page 76: Event

    12-6-3. Event  PATH – Allows the user to change the LOG SAVE PATH.  SIZE – Allows the user to set the LOG SIZE.  EVENT – Allows the user to set the EVENT LOG, ICON, EVENT LIST. o LOG – Allows the user to ENABLE or DISABLE LOG for the following options; STARUP, SHUTDOWN, SETUP CHANGE, SENESOR IN, ALARM OUT, MOTION, CAMERA LOSS, NETWORK LOSS, RECORD o ICON –...

  • Page 77: Event Search

    12-6-4. Event Search  FROM – Allows the user to set the FIRST DATE and TIME for EVENT SEARCH.  TO – Allows the user to set the LAST DATE and TIME for EVENT SEARCH.  FIND – Allows the user to FIND the EVENT SEARCH for the selected DATE and TIME. ...

  • Page 78: Record

     RECORD CONDITION – ALWAYS, EVENT, AUTO RECORD (Allows the user to set the RECORD CONDITION) o ALWAYS – Allows the user to ALWAYS RECORD when CONNECTED to a SITE. o EVENT – Allows the user to RECORD when an EVENT is TRIGGERED. o AUTO RECORD –...

  • Page 79: 12-6-7.Display

    12-6-7.Display  SECONDARY MONITOR IMAGE CORRECTION – Allows the user to ENABLE or DISABLE SECONDARY MONITOR IMAGE CORRECTION when using a secondary monitor. Page...

  • Page 80: Cms

    13. CMS 13-1. PC System Requirement Minimum System Requirements  Windows XP, Windows 7 Operating System  Intel Dual Core 2.0 Ghz Processor  2GB RAM  256 MB+ nVidia or ATi Video Card  DirectX 9.0C or Higher  Disk Space 1 GB ...

  • Page 81: Live Mode

    13-2. Live Mode Button Function Description GROUP Allows the user to select and manage a group. LIVE CONNECT to selected SITES DISCONNECT from selected SITES SEARCH Playback recorded data on remote DVR DEVICE Allows the user to access remote DVR for remote setting.

  • Page 82: Operations

    13-3. Operations 13-3-1. Group Management 1. Click button. Then MANAGEMENT window will display. 2. Click button to add new site. 3. Input the proper site information. 4. Click button. Then “Group-1” will be generated. Click the site on SAVED SITES and the group on GROUPS. And click Page...

  • Page 83: Connection

    6. Click to add the site to the group. 7. Click button to apply. 13-3-2. Connection 1. Click button. 2. Group window will show the connection process status. The icon color of connected site and channel will changed in to Green 3.

  • Page 84: Playback

    13-3-3. Playback 1. Select the site from GROUP window 2. Click button. Then Remote Search Widow will display. 3. Select the target date and time. And click button to playback. Page...

  • Page 85: Setup

    13-3-4. Setup 1. Select the site from GROUP window 2. Click button. Then Remote Setup Login Widow will display. 3. Enter the password. Then the setup menu will display. (NOTE: The default password is 1111) Page...

  • Page 86: Web Client

    14. Web Client 14-1. PC System Requirement Minimum System Requirements  Windows XP, Windows 7 Operating System  Intel Dual Core 2.0 Ghz Processor  2GB RAM  256 MB+ nVidia or ATi Video Card  DirectX 9.0C or Higher ...

  • Page 87: Live Mode

    14-3. Live Mode Button Function Description DATE & TIME Displays the current DATE & TIME CONNECT/DISCONNE Connect or Disconnect network connection SEARCH Switches to SEARCH MODE DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE Allows the user to control the PTZ camera SCAN...
  • Page 88 MENU Allows the user to open the PTZ menu CAPTURE Capture a still image from LIVE MODE PAUSE Pause the frame during LIVE MODE PRESET Allows the user to change the PTZ Preset SETUP Opens the SETUP MENU HDD USAGE Displays the current HDD Usage Status NETWORK...

  • Page 89: Search Mode

    14-4. Search Mode Button Function Description DATE & TIME Displays the recording time of the data selected CONNECT/DISCONNECT Connect or Disconnect network connection LIVE MODE Switches to LIVE MODE CAPTURE Capture a still image in SEARCH MODE MARK IN Allows the user to set the starting time for video BACKUP MARK OUT Allows the user to set the ending...
  • Page 90 SEARCH CALENDAR The calendar displays recorded data in blue TIMELINE BAR TIMELINE BAR of recorded data is displayed in blue PLAYBACK BUTTONS Playback the buttons DISPLAY MODE Allows the user to select a CHANNEL or change the DISPLAY MODE DIGITAL ZOOM Allows the user to DIGITAL ZOOM during LIVE MODE and SEARCH MODE...

  • Page 91: Operations

    14-5. Operations 14-5-1. Digital Zoom Digital Zoom allows the user to digitally zoom into any area during single channel viewing. Use the mouse scroll to digitally zoom in and zoom out. Digital zoom is available in both LIVE MODE and SEARCH MODE. NOTE: DIGITAL ZOOM is only available in SINGLE CHANNEL viewing.

  • Page 92: Web Client Backup

    14-5-3. Web Client Backup CAPTURE – Allows the user to CAPTURE a still image. MARK IN – Allows the user to set the starting time for video BACKUP. MARK OUT – Allows the user to set the ending time for video BACKUP. BACKUP –...

  • Page 93: 15-1-2.Ptz Control

    3. The app will display the selected channel(s). Double tap the channel screen to switch 1 channel display to multichannel split display or vice versa. 15-1-2.PTZ Control To control the PTZ functions of the camera, tap the menu button. Then PTZ menu icons will display. Using the PTZ icon on the screen, control PTZF control.
  • Page 94 15-1-3. Playback 1. Select the registered device and select the channels up to 4 channels to search and playback. Select Mode as ‘Playback’ and click ‘Connect’ . Then the search window will display. 2. Select the date, hour, minute, AM/PM and click ‘Connect & Play’ Page...
  • Page 95 3. The app will display the selected channel(s). 4. Tap the menu button. Then Playback menu icons will display. 15-2. Viewer for Android Phone 1. Enter the Android Google Play Store. 2. Search “Microcam” in the Android Market and install the app. 15-2-1.
  • Page 96 3. The app will display the selected channel(s). 4. To control the PTZ function of the camera, tap the channel screen, then the channel name will be highlighted in Yellow. Using the PTZ menu icons on the screen, control PTZF control. Page...

This manual is also suitable for:

Vvr4008hmVvr4016sefdVvr4008seVvr4016hmVvr4016seVvr4004sefd ... Show all

Table of Contents