Memo & Camera Titles; E-Mail Setup - Mitsubishi Electric DX-TL5000E User Manual

4-3. If you want to make a new registration, left-click
"register." If you want to cancel a new registration, left-
click "clear."
4-4. (If you have selected "register" • • • )
It will be added to "Change authorities of users."
4-5. (If you have selected "clear" • • • )
Clears the specified contents.
5-1. (To change the access method settings • • • )
Select the item to be changed in the "Access Mode
Setup."
• Use Keep-Alive:
Maintains the connection of TCP in order to speed
up the update of the live pictures, etc.
Uses keep-alive when the check mark is entered.
• Use SSL for Web Access:
Sets the level of the encryption function (SSL).
"No SSL": Does not use the encryption function.
"Menus only": Uses the encryption function for the
menus only.
"Menus + Pictures": Uses the encryption function
for the menus and pictures.
• SSL Port Settings:
Sets the port number used for SSL.
• Band-Width Limit:
Controls the band width of the communication. The
available setting items are "No Limit," "30Mbps,"
"20Mbps," "10Mbps," "7.5Mbps," "5Mbps," "3Mbps,"
"2Mbps," "1Mbps," "750kbps," "500kbps,"
"300kbps," "200kbps," "100kbps."
• When using SSL, the following message appears.
Select "Yes" and then continue the operation.
• When using keep-alive, the update speed of the
picture becomes faster, however, the number of the
users that can be connected at the same time is
restricted to 5.
5-2. Set the desired setting in "New Settings" and then
select "change" and left-click.
••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••• Communications by Web Browser
• Memo & Camera Titles
This is the screen for setting or changing the recorder and
the camera titles.
1. Select "Memo & Camera Titles" and left-click.
• The "[Memo & Camera Titles]" screen appears.
2. Enter the desired recorder or camera title to "New Text."
• The recorder and the camera titles currently set are
shown in the "Current Text."
3. Select "change" and left-click.

• E-mail Setup

This is the screen for setting the information related to the
e-mail server or sender, and setting the e-mail address of
the receiver.
1. Select "E-mail Setup" and left-click.
• The "[E-mail Setup]" screen appears.
25